Rite-ride 2171 Manuel d'utilisateur télécharger pdf

2171

NSTALLATION I NSTRUCTIONS

Congratulations - your new air helper springs are

quality products capable of improving the handling and

comfort of your vehicle. As with all products, proper

installation is the key to obtaining all of the benefits your

kit is capable of delivering. Please take a few minutes to

read through the instructions to identify the components

and learn where and how they are used. It is a good idea

to start by comparing the parts in your kit with the parts

list below.

The heart of the air spring kit is, of course, the air

helper springs. Remember that the air springs must flex

and expand during operation, so be sure that there is

enough clearance to do so without rubbing against any

other part of the vehicle.

Be sure to take all applicable safety precautions

during the installation of the kit. The instructions listed

in this brochure and the illustrations all show the right, or

passenger’s side of the vehicle. To install the left side

assembly, simply follow the same procedures.

Your kit includes separate inflation valves and air line

for each air helper spring. This will allow you to level

your vehicle from side to side as well as from front to

back. If you would rather have a single valve inflation

system, your dealer can supply the required T-fitting.

IMPORTANT!

For your safety and to prevent possible damage to your

vehicle, do not exceed the maximum load recommended

by the vehicle manufacturer (GVWR). Although your Air

Helper Springs are rated at a maximum inflation pressure

of 100 psi, this pressure may allow you to carry too great

a load on some vehicles. It is best to have your vehicle

weighed once it is completely loaded and compare that

weight to the maximum allowed. Check your vehicle

owner’s manual or data plate on driver side door for

maximum loads listed for your vehicle.

When inflating your Air Helper Springs, add air

pressure in small quantities, checking pressure frequently

during inflation. The air spring requires much less air

volume than a tire and, therefore, inflates much quicker.

21-8135 10-07 NAD-30693-6

WARNING:

Do not inflate this assembly when it is

unrestricted. The assembly must be restricted

by the suspension or other adequate structure.

Do not inflate beyond 100 psi. Improper use or

overinflation may cause property damage or

severe personal injury.

PARTS LIST

AIR SPRING 7076 2

UPPER BRACKET 5219 2

LOWER BRACKET 5098 2

DISK 5204 2

BRACKET STRAP 5086 2

3/8" -16 x 1-1/2" HEX BOLT 8

3/8" -16 FLANGED LOCK NUT 12

3/8" -16 x 3/4" FLANGED HEX BOLT 2

3/8" -16 x 3-1/2" CARRIAGE BOLT 4

3/8" LARGE FLAT WASHER 8

3/4" -16 JAM NUT 2

3/4" STAR WASHER 2

5/16" FLAT WASHER 4

INFLATION VALVE 2

ELBOW FITTING 2

AIR LINE TUBING 1

THERMAL SLEEVE 2

NYLON TIE 6

CAUTION TAG 2

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - PARTS LIST

2171INSTALLATION I NSTRUCTIONSCongratulations - your new air helper springs arequality products capable of improving the handling andcomfort of your v

Page 2 - 7/16"

6TROUBLE SHOOTING GUIDEAir spring will not inflateEnsure that the air line tubing is inserted into the air fittings as far as possible. The tubing s

Page 3 - STEP 1 - PREPARE THE VEHICLE

7FIRESTONE LIMITED LIFETIME AIR SPRING WARRANTYFirestone Industrial Products Company LLC (“Firestone”) warrants that its Ride Rite Air Spring Assembly

Page 4 - MAX PRESSURE (LOADED) 100 PSI

Page 5 - Trouble Shooting Guide

HOLES TOBE DRILLED7/16"REARWHEEL2171AIRSPRINGDISKLOWERBRACKET3/8 -16 FLANGEDHEX BOLT3/8" -16 x 3-1/2"CARRIAGEBOLTNOTE: Both illustrat

Page 6

STEP 1 - PREPARE THE VEHICLEWith the vehicle on a solid level surface, chock thefront wheels. Raise the vehicle by the axle and removethe rear wheels

Page 7

STEP 6 - INSTALL THE DRIVER'S SIDE ASSEMBLYFollow steps 1-5 for assembly and installation of the driver's side assembly. Reverse any orient

Page 8 - ONLINE AUCTION PURCHASES

Operating Instructions and Trouble Shooting Guide21-1083 4-12 Thank you for purchasing Firestone air helper springs. You have purchased a quality prod

Page 9 - AIR SPRING TECHNICAL DATA

2SAFETY TIPSNever exceed the manufacturer’s recommended Gross Vehicle Weight Rating (GVWR)As with your vehicle’s tires, an air helper spring is a pneu

Page 10 - IMPORTANT

3the suspension system. As more air pressure is added to the air springs, they will support more weight. You will be able to compensate for a heavy lo

Page 11

4INFLATING THE AIR SPRINGSWith the air helper springs installed on your vehicle and the vehicle sitting on a level surface, visually verify that the v

Page 12 - Air Command™

5Description Style Ride Height“X”Min/Max AirPressureMax Load @100 psi(per pair)6868 Single Convoluted 160BY 5.0" - 6.0" 5 / 100 psi 3600 lbs

Commentaires sur ces manuels

Pas de commentaire

Rite-ride 2171 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rite-ride 2171. Rite-Ride 2171 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rite-ride 2171