Rite-ride 2423 Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

Congratulations - your new Air Helper Springs are

quality products capable of improving the handling and

comfort of your vehicle. As with all products, proper

installation is the key to obtaining all of the benefits your

kit is capable of delivering. Please take a few minutes to

read through the instructions to identify the components

and learn where and how they are used. It is a good idea

to start by comparing the parts in your kit with the parts

list below.

The heart of the kit is, of course, the air helper springs.

Remember that the air helper springs must flex and expand

during operation, so be sure that there is enough clearance

to do so without rubbing against any other part of the

vehicle.

Be sure to take all applicable safety precautions

during the installation of the kit. The instructions listed

in this brochure and the illustrations all show the left, or

driver’s side of the vehicle. To install the right side

assembly simply follow the same procedures.

This kit includes inflation valves and air lines for each

air spring. This will allow you to compensate for unbal-

anced loads. If you would rather have a single inflation

valve system to provide equal pressure to both air springs,

your dealer can supply the optional "T" fitting.

IMPORTANT!

For your safety and to prevent possible damage to your

vehicle, do not exceed the maximum load recommended

by the vehicle manufacturer (GVWR). Although your Air

Helper Springs are rated at a maximum inflation pressure

of 100 psi, this pressure may allow you to carry too great

a load on some vehicles. It is best to have your vehicle

weighed once it is completely loaded and compare that

weight to the maximum allowed. Check your vehicle

owner’s manual or data plate on driver side door for

maximum loads listed for your vehicle.

When inflating your Air Helper Springs, add air

pressure in small quantities, checking pressure fre-

quently during inflation. The air spring requires much

less air volume than a tire and, therefore, inflates much

quicker.

WARNING:

Do not inflate this assembly when it is

unrestricted. The assembly must be re-

stricted by the suspension or other adequate

structure. Do not inflate beyond 100 psi.

Improper use or over inflation may cause

property damage or severe personal injury.

21-8332 12-07 NAD-34182-2

2423

AIR SPRING 6868 2

UPPER LEFT BRACKET 5506 1

UPPER RIGHT BRACKET 5507 1

LOWER LEFT BRACKET 5508 1

LOWER RIGHT BRACKET 5509 1

LEFT U-BOLT CLAMP 5510 1

RIGHT U-BOLT CLAMP 5511 1

BRACKET CLAMP 5181 2

HEAT SHIELD 1

EXHAUST CLAMP 2

3/8"-16 X 5 1/2" CARRIAGE BOLT 6

3/8"-16 X 1" HEX BOLT 2

3/8"-16 X 5/8" FLAT HEAD BOLT 2

3/8"-16 LOCK NUT 6

5/16" X 5 1/2" X 2 1/4" BAIL CLAMP 4

5/16"-18 LOCK NUT 8

3/8"-16 NUT PLATE 2

5/8"-18 JAM NUT 2

5/16" FLAT WASHER 4

18 ft. TUBING 0938 1

INFLATION VALVE 3032 2

STRAIGHT FITTING 3055 2

THERMAL SLEEVE 0899 2

NYLON TIE 8

CAUTION TAG 2

PARTS LIST

1 2 3 4 5 6 ... 12 13

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSCongratulations - your new Air Helper Springs arequality products capable of improving the handling andcomfort of your vehic

Page 2 - INSTALLATION

5Description Style Ride Height“X”Min/Max AirPressureMax Load @100 psi(per pair)6868 Single Convoluted 160BY 5.0" - 6.0" 5 / 100 psi 3600 lbs

Page 3 - STEP 2 - PREASSEMBLE

6TROUBLE SHOOTING GUIDEAir spring will not inflateEnsure that the air line tubing is inserted into the air fittings as far as possible. The tubing s

Page 4 - MAX PRESSURE (LOADED) 100 PSI

7FIRESTONE LIMITED LIFETIME AIR SPRING WARRANTYFirestone Industrial Products Company LLC (“Firestone”) warrants that its Ride Rite Air Spring Assembly

Page 5 - Figure "C"

Page 6 - Trouble Shooting Guide

5/16”-24FLANGE LOCKNUT5/16”-24BAIL CLAMPUPPERBRACKETFRAMELOWERBRACKET3/8”-16 X 5/8”FLAT HEADBOLTAIRSPRINGUPPER BRACKETINSTALLATIONPREASSEMBLYAIR SPRIN

Page 7

AIR HOSEINFLATIONVALVESBUMPERAIRSPRINGSSTEP 1 - PREPARE THE VEHICLEWith the vehicle on a solid, level surface chock the front wheels.Raise the vehicle

Page 8

Select a location on the vehicle for the air inflation valves. The location can be on the bumper or the body of thevehicle, as long as it is in a pro

Page 9 - ONLINE AUCTION PURCHASES

21-8279 08-08 NBD-15863-1DESCRIPTION QTY.HEAT SHIELD 1CLAMPS 2PARTS LISTEXHAUST PIPEOPEN AIRSPACEOPEN AIRSPACECLAMPSSTEP 1Bend the heat

Page 10 - AIR SPRING TECHNICAL DATA

Operating Instructions and Trouble Shooting Guide21-1083 4-12 Thank you for purchasing Firestone air helper springs. You have purchased a quality prod

Page 11 - IMPORTANT

2SAFETY TIPSNever exceed the manufacturer’s recommended Gross Vehicle Weight Rating (GVWR)As with your vehicle’s tires, an air helper spring is a pneu

Page 12 - WARRANTY QUESTIONS

3the suspension system. As more air pressure is added to the air springs, they will support more weight. You will be able to compensate for a heavy lo

Page 13 - Air Command™

4INFLATING THE AIR SPRINGSWith the air helper springs installed on your vehicle and the vehicle sitting on a level surface, visually verify that the v

Commentaires sur ces manuels

Pas de commentaire

Rite-ride 2423 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rite-ride 2423. Rite-Ride 2423 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rite-ride 2423