Rite-ride 2379 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rite-ride 2379. Rite-Ride 2379 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
2379
21-8301 09-07 NAD-34585-1
INSTALLATION INSTRUCTIONS
Congratulations - your new Air Helper Springs are quality
products capable of improving the handling and comfort of
your vehicle. As with all products, proper installation is the
key to obtaining all of the benefits your kit is capable of
delivering. Please take a few minutes to read through the
instructions to identify the components and learn where and
how they are used. It is a good idea to start by comparing the
parts in your kit with the parts list below.
The heart of the air helper spring kit is, of course, the air
springs. Remember that the air helper springs must flex and
expand during operation, so be sure that there is enough
clearance to do so without rubbing against any other part of
the vehicle.
Be sure to take all applicable safety precautions during the
installation of the kit. The instructions listed in this brochure
and the illustrations all show the left, or driver’s side of the
vehicle. To install the right side assembly simply follow the
same procedures.
Your kit includes separate inflation valves and air lines for
each air helper spring. This will allow you to level your vehicle
from side to side as well as from front to back. If you would
rather have a single valve inflation system, your dealer can
supply the required "T" fitting.
IMPORTANT!
For your safety and to prevent possible damage to your
vehicle, do not exceed the maximum load recommended by
the vehicle manufacturer (GVWR). Although your Air Helper
Springs are rated at a maximum inflation pressure of 100
P.S.I., this pressure may allow you to carry too great a load
on some vehicles. Check your vehicle owner’s manual for
maximum loads listed for your vehicle.
When inflating your Air Helper Springs, add air pressure
in small quantities, checking pressure frequently during
inflation. The air spring requires much less air volume than
a tire and, therefore, inflates much quicker.
WARNING:
Do not inflate this assembly when it is
unrestricted. The assembly must be restricted
by the suspension or other adequate structure.
Do not inflate beyond 100 P.S.I. Improper use
or over inflation may cause property damage or
severe personal injury.
AIR SPRING 9000 2
UPPER BRACKET 5202 2
LOWER BRACKET 5092 2
BRACKET STRAP/SHIM 1/2" 5086 4
3/8"-16 x 4-1/2" CARRIAGE BOLT 8
3/8"-16 X 3/4" FLANGE BOLT 6
3/8"-16 X 4" HEX BOLT 8
3/8"-16 FLANGE LOCK NUT 16
3/8" SPECIAL WASHER 8
5/16" FLAT WASHER 4
AIR LINE TUBING 1
VALVE CAP 2
INFLATION VALVE 2
ELBOW FITTING 2
THERMAL SLEEVE 2
NYLON TIE 6
CAUTION TAG 2
PARTS LIST
Installation of this kit requires a
minimum of 6-1/2" of clearance between
the tire side wall and the frame.
Vue de la page 0
1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

237921-8301 09-07 NAD-34585-1INSTALLATION INSTRUCTIONSCongratulations - your new Air Helper Springs are qualityproducts capab

Page 2 - FIGURE "A"

6TROUBLE SHOOTING GUIDEAir spring will not inflateEnsure that the air line tubing is inserted into the air fittings as far as possible. The tubing s

Page 3 - STEP 1 - PREPARE THE VEHICLE

7FIRESTONE LIMITED LIFETIME AIR SPRING WARRANTYFirestone Industrial Products Company LLC (“Firestone”) warrants that its Ride Rite Air Spring Assembly

Page 4 - MAX PRESSURE (LOADED) 100 PSI

8Telephone: 317-818-8600 1-800-888-0650 www.ride-rite.com© 2011 Firestone Industrial Products CompanyLIGHTDUTYSTANDARD DUTYHEAVY DUTY XTRA XTREMEPR

Page 5 - Trouble Shooting Guide

FRAMENOTE: Both illustrations are of the left, or driversside, of the vehicle. Reverse any orientations whenassembling and installing the right, or

Page 6

DRIVER'S SIDEFRONT FIGURE "B" FIGURE "C" FIGURE "E"STEP 1 - PREPARE THE VEHICLERemove the negative battery cable

Page 7

NOTE: Once the air helper springs are installed, it is recommended that the vehicle not be lifted by the frame, asover-extension may occur, res

Page 8 - ONLINE AUCTION PURCHASES

Operating Instructions and Trouble Shooting Guide21-1083 4-12 Thank you for purchasing Firestone air helper springs. You have purchased a quality prod

Page 9 - AIR SPRING TECHNICAL DATA

2SAFETY TIPSNever exceed the manufacturer’s recommended Gross Vehicle Weight Rating (GVWR)As with your vehicle’s tires, an air helper spring is a pneu

Page 10 - IMPORTANT

3the suspension system. As more air pressure is added to the air springs, they will support more weight. You will be able to compensate for a heavy lo

Page 11 - WARRANTY QUESTIONS

4INFLATING THE AIR SPRINGSWith the air helper springs installed on your vehicle and the vehicle sitting on a level surface, visually verify that the v

Page 12 - STEP #3:

5Description Style Ride Height“X”Min/Max AirPressureMax Load @100 psi(per pair)6868 Single Convoluted 160BY 5.0" - 6.0" 5 / 100 psi 3600 lbs

Commentaires sur ces manuels

Pas de commentaire